Modified Synthesis of Edge ScrolledReduced GrapheneOxide with High Surface Area
Keywords:
acid treated graphite, reduced graphene oxide, high surface areaAbstract
Synthesis of graphene with the high surface area has been very attractive for various energy storage applications. In this work, we describe a scalable method for producing edge scrolled reduced graphene oxide (r-GO) with the high surface area by modified Hummer’s method. Strong acid treated graphite flakes were used to synthesis reduced graphene oxide. Few layered, edge scrolled reduced graphene oxide was obtained by low temperature (200℃) thermal treatment in a hydrogen atmosphere. The formation of few layered graphitic structure of reduced graphene oxide was confirmed by TEM analysis. The specific surface area of the reduced graphene oxide was measured by nitrogen adsorption technique. The reduced graphene oxide derived from acid treated graphite flakes exhibits high surface area (~ 500 m2/g) than non acid treated graphite flakes (214.4 m2/g).
Downloads
References
and storage applications. Journal of Power Sources, 196(11), 4873-4885.
Chen, G., Weng, W., Wu, D., Wu, C., Lu, J., Wang, P., & Chen, X. (2004). Preparation and characterization of
graphite nanosheets from ultrasonic powdering technique. Carbon, 42(4), 753-759.
Das, T. K., & Prusty, S. (2013). Graphene-based polymer composites and their applications. Polymer-Plastics
Technology and Engineering, 52(4), 319-331.
Hummers Jr, W. S., & Offeman, R. E. (1958). Preparation of graphitic oxide. Journal of the American Chemical
Society, 80(6), 1339-1339.
Korkut, S., Roy-Mayhew, J. D., Dabbs, D. M., Milius, D. L., & Aksay, I. A. (2011). High surface area tapes
produced with functionalized graphene. ACS nano, 5(6), 5214-5222.
Razieh, J., Jahanshahi, M., Rashidi, A., & Ghoreyshi, A. A. (2013). Synthesize and characterization of graphene
nanosheets with high surface area and nano-porous structure. Applied surface science, 276, 672-681.
Shahriary, L., & Athawale, A. A. (2014). Graphene oxide synthesized by using modified hummers
approach. IJREEE, 2(1), 58-63.
Sun, L. W., Zhao, J., Zhou, L. J., & Li, G. D. (2013). Facile hydrothermal preparation of graphene oxide
nanoribbons from graphene oxide. Chemical Communications, 49(54), 6087-6089.
Wang, J., & Ellsworth, M. (2009). Graphene aerogels. ECS Transactions, 19(5), 241-247.
Worsley, M. A., Kucheyev, S. O., Mason, H. E., Merrill, M. D., Mayer, B. P., Lewicki, J., ... & Satcher, J. H.
(2012). Mechanically robust 3D graphene macroassembly with high surface area. Chemical
Communications, 48(67), 8428-8430.
Xu, Y., Sheng, K., Li, C., & Shi, G. (2010). Self-assembled graphene hydrogel via a one-step hydrothermal
process. ACS Nano, 4(7), 4324-4330.
Zhang, L., Zhang, F., Yang, X., Long, G., Wu, Y., Zhang, T & Chen, Y. (2013). Porous 3D graphene-based
bulk materials with exceptional high surface area and excellent conductivity for supercapacitors. Scientific
reports, 3.
