MHD Stagnation Point Flow over a Stretching/Shrinking Sheet in Nanofluid with Suction Effect

Authors

  • Nurain Naziha Alias Department of Mathematics, Faculty of Science, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor, Malaysia
  • Haliza Rosali Department of Mathematics, Faculty of Science, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor, Malaysia
  • Norfifah Bachok @ Lati Department of Mathematics, Faculty of Science, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor, Malaysia
  • Ioan Pop Department of Mathematics, Babeş-Bolyai University, 400084 Cluj-Napoca, Romania

DOI:

https://doi.org/10.37134/jsml.vol13.1.6.2025

Keywords:

Magnetohydrodynamics, stagnation point flow, nanofluids, suction, stretching, shrinking sheet

Abstract

The effect of suction on magnetohydrodynamics (MHD) stagnation point flow of a nanofluid towards a linearly stretching/shrinking sheet at the boundary was investigated. The water-based nanofluids containing three metallic nanoparticles namely, copper (Cu), alumina (Al203) and titania (Ti02)  are considered. By using a similarity transformation, the governing nonlinear partial differential equations (PDEs) subjected to the boundary conditions are converted into the system of ordinary differential equations (ODEs). Numerical results are obtained using the boundary value problem solver bvp4c in MATLAB software. The investigation focuses on the impact of suction parameters and the nanoparticle volume fraction parameter on the nanofluids with Prandtl number, Pr = 6.2. The graphical representation and analysis of the influence of the suction parameter S and the magnetic parameter M on the skin friction coefficient, local Nusselt number are provided. Both velocity and temperature profiles are presented to show the duality of the solution. The numerical results of both velocity and temperature profiles including the skin friction coefficient and local Nusselt number are presented for various values of the governing parameters. The results show that the temperature and velocity profiles are influenced by suction, magnetic field, and nanoparticle volume fraction. The finding suggests that incorporating nanoparticles into the based fluids leads to an increase in both the skin friction coefficient and the heat transfer rate at the surface.

Downloads

Download data is not yet available.

References

Abd Rahman NH, Bachok N, Rosali H. (2019). Magnetohydrodynamics stagnation-point flow over a stretching/shrinking sheet in nanofluids. Universal Journal of Mechanical Engineering, 7(4), 183-191.

Ahmad S, Rohni AM, Pop I. (2011). Blasius and sakiadis problems in nanofluids. Acta Mechanica, 218, 195-204.

Anwar MI, Shafie S, Hayat T, Shehzad SA, Salleh MZ. (2017). Numerical study for MHD stagnation-point flow of a micropolar nanofluid towards a stretching sheet. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39, 89-100.

Bachok N, Ishak A, Nazar R, Senu N. (2013). Stagnation-point flow over a permeable stretching/shrinking sheet in a copper-water nanofluid. Boundary value problems, 1, 1-10.

Bachok N, Ishak A, Pop I. (2011). Stagnation-point flow over a stretching/shrinking sheet in a nanofluid. Nanoscale Research Letters, 6, 1-10.

Bachok N, Tajuddin SNN, Anuar NS, Rosali H. (2023). Numerical computation of stagnation point flow and heat transfer over a nonlinear stretching/shrinking sheet in hybrid nanofluid with suction/injection effects. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 107(1), 80-86.

Buongiorno J. (2006). Convective transport in nanofluids. Journal of Heat Transfer, 128, 240-250.

Choi S. (1995). Enhancing thermal conductivity of fluids with nanoparticles. ASME Fluids Engineering Division, 231, 99-105.

Hiemenz K. (1911). Die Grenzschicht an einem in den gleichförmigen Flüssigkeitsstrom eingetauchten geraden Kreiszylinder. Dinglers Polytechnisches Journal, 326, 321-324.

Homann F. (1936). Der Einfluss grosser Zahigkeit bei der Stromung um den Zylinder und um die Kugel. Zeitschrift fur Angewandte Mathematik und Mechanik, 16, 153-164.

Hsu CH, Tsai TH, Chang CC, Huang WH. (2019). A boundary layer flow analysis of a magnetohydrodynamic fluid over a shrinking sheet. Advances in Mechanical Engineering, 11(3), 1-12.

Ibrahim W, Shankar B, Nandeppanavar MM. (2013). MHD stagnation point flow and heat transfer due to nanofluid towards a stretching sheet. International Journal of Heat and Mass Transfer, 56(1-2), 1-9.

Ishak A, Jafar K, Nazar R, Pop I. (2009). MHD stagnation-point flow towards a stretching sheet. Physic A, 388, 3377-3383.

Jaafar A, Waini I, Jamaludin A, Nazar R, Pop I. (2022). Magnetohydrodynamics flow and heat transfer of a hybrid nanofluid past a nonlinear surface stretching/shrinking with effects of thermal radiation and suction. Chinese Journal of Physics, 79, 13-27.

Jain S,Choudhary R. (2015). Effects of MHD on boundary layer flow in porous medium due to exponentially shrinking sheet with slip. Procedia Engineering, 127, 1203-1210.

Kamal F, Zaimi K, Ishak A, Pop I. (2019). Stability analysis of MHD stagnation-point flow towards a permeable stretching/shrinking sheet in a nanofluid with chemical reactions effect. Sains Malaysiana, 48(1), 243-250.

Mahapatra TR, Gupta AS (2001). Magnetohydrodynamic stagnation-point flow towards a stretching sheet. Acta Mechanica, Vol.152, 191-196.

Mahapatra TR, Gupta, AS (2003). Stagnation-point flow towards a stretching surface. Canadian Journal of Chemical Engineering, 81, 258-263.

Mansur S, Ishak A, Pop I. (2015). The magnetohydrodynamic stagnation point flow of a nanofluid over a stretching/shrinking sheet with suction. Plos One, 10, 1-14.

Masuda H, Ebata AKT, Hishinuma N. (1993). Alteration of thermal conductivity and viscosity of liquid by dispersing ultra-fine particles. Netsu Bussei, 4(4), 227-233.

Oztop HF, Abu-Nada E. (2008). Numerical study of natural convection in partially heated rectangular enclosures filled with nanofluids. International Journal of Heat and Fluid Flow, 29(5), 1326-1336.

Rashidi MM, Ibrahim B, Shankar W, Nandeppanavar MM. (2013). MHD stagnation point flow and heat transfer due to nanofluid towards a stretching sheet. International Journal of Heat and Mass Transfer, 56, 1-9.

Rashidi MM, Rostami N, Freidoonimehr S, Abbasbandy. (2014). Free convective heat and mass transfer for MHD fluid flow over a permeable vertical stretching sheet in the presence of the radiation and buoyancy effects, Ain Shams Engineering Journal, 5, 901-912.

Samat NAA, Bachok N, Arifin NM. (2024). Boundary layer stagnation point flow and heat transfer over a nonlinear stretching/shrinking sheet in hybrid carbon nanotubes: numerical analysis and response surface methodology under the influence of magnetohydrodynamics. Computation, 12(46), 1-29.

Sandeep N, Sulochana C. (2015). Dual solutions for unsteady mixed convection flow of MHD micropolar fluid over a stretching/shrinking sheet with non-uniform heat source/sink. Engineering Science and Technology, an International Journal, 18, 738-745.

Sharma R, Ishak A, Pop I. (2014). Stability analysis of magnetohydrodynamic stagnation-point flow toward a stretching/shrinking sheet. Computers Fluids, 102, 94-98.

Tiwari RK, Das MK (2007). Heat transfer augmentation in a two-sided lid-driven differentially heated square cavity utilizing nanofluids. International Journal of Heat and Mass Transfer, 50, 2002-2018.

Wang CY. (2008). Stagnation flow towards a shrinking sheet. International Journal of Non-Linear Mechanics, 43, 377-382

Downloads

Published

2025-01-02

How to Cite

Alias, N. N., Rosali, H., Bachok @ Lati, N., & Ioan Pop. (2025). MHD Stagnation Point Flow over a Stretching/Shrinking Sheet in Nanofluid with Suction Effect. Journal of Science and Mathematics Letters, 13(1), 51–60. https://doi.org/10.37134/jsml.vol13.1.6.2025