Kajian tinjauan literatur sistematik terhadap pendedahan pelajar universiti kepada percetakan 3D sebagai persediaan ke industri

A Systematic Literature Review Study on University Students' Exposure to 3D Printing as Preparation for Industry

  • Idham Aidil Akmal Sudin Universiti Pendidikan Sultan Idris
  • Bahbibi Rahmatullah Universiti Pendidikan Sultan Idris
  • Muhammad Fadhil Wong Abdullah Universiti Pendidikan Sultan Idris
  • Khairul Fikri Tamrin Universiti Pendidikan Sultan Idris
  • Moh Khairudin Universitas Negeri Yogyakarta, Yogyakarta, Indonesia
  • Sitti Rachmawati Yahya Universitas Nasional, Jakarta, Indonesia
Keywords: percetakan 3D, universiti, pendidikan, pembelajaran, industri

Abstract

Pendedahan dalam bidang percetakan tiga dimensi (3D) untuk pelajar universiti dan kolej adalah berkaitan dengan persediaan pelajar melangkah ke industri pekerjaan namun tidak diberi penumpuan yang sewajarnya. Oleh itu kajian berbentuk tinjauan literatur sistematik ini menyasarkan untuk mengenal pasti tema dalam kajian berkenaan pembelajaran percetakan 3D. Kajian ini telah melakukan pencarian berdasarkan kata kunci yang dipilih melalui pengkalan data Scopus. Hasil pemilihan akhir telah mendapati sebanyak 26 artikel selepas melalui fasa pemilihan dan pengecualian. Hasil analisis tematik dalam kajian ini menemui bidang kejuruteraan, reka bentuk dan seni menjadi tumpuan di dalam artikel yang dipilih. Implikasi kajian adalah penambahbaikan dalam pembelajaran percetakan 3D di peringkat universiti agar pendedahan yang sewajarnya diberikan kepada pelajar sebelum mereka melangkah ke alam pekerjaan dalam dunia industri.

Abstract

Exposure to the field of three-dimensional (3D) printing for university and college students is highly relevant to the preparation of students to enter the working industry. This systematic literature review aims to identify the many learning themes in the research on 3D printing learning. This research began with conducting searches based on selected keywords through the Scopus database. The final selection results recorded a total of 26 articles after the selection and exclusion phase. The results of the thematic analysis in this study found the field of engineering, design, and art to be the focus of the selected articles. The implication of the study is an improvement in the learning of 3D printing at the university level so that appropriate exposure is given to students before they step into the realm of employment in the industry.

Downloads

Download data is not yet available.

References

Alabi, M. O., De Beer, D., & Wichers, H. (2019). Applications of additive manufacturing at selected South African universities: promoting additive manufacturing education. Rapid Prototyping Journal, 25(4), 752-764. https://doi.org/10.1108/RPJ-08-2018-0216.

Antonaci, A., Klemke, R., & Specht, M. (2019). The effects of gamification in online learning environments: A systematic literature review. Informatics, 6(3). https://doi.org/10.3390/informatics6030032.

Bailey, R. T., & Friebele, B. (2020). 3D design in art and engineering: An interdisciplinary experiment. ASEE Annual Conference and Exposition, Conference Proceedings, 2020-June.

Bill Tseng, T.-L., Pan, R., Zheng, J., Gonzalez, M. V., Awalt, C. J., & Medina, F. (2011). Digital additive manufacturing for engineering education: A virtual Rapid Prototyping simulator approach. ASEE Annual Conference and Exposition, Conference Proceedings.

Bossart, J. L., Gonzalez, S. R., & Bharti, N. (2019). Retrospective analysis of a sustainable 3D printing service in an academic library. Library Hi Tech, 37(4), 669–678. https://doi.org/10.1108/LHT-12-2018-0196.

Chien, Y.-H., & Chu, P.-Y. (2018). The Different Learning Outcomes of High School and College Students on a 3D-Printing STEAM Engineering Design Curriculum. International Journal of Science and Mathematics Education, 16(6), 1047–1064. https://doi.org/10.1007/s10763-017-9832-4.

Chikkamath, S., Shet, R., Praveen, P., Nalini, C. I., & Kotturshettar, B. B. (2020). Effective utilization of maker space for facilitating product realization course. Journal of Engineering Education Transformations, 33(3), 37–42. https://doi.org/10.16920/jeet/2020/v33i3/144019.

Chituc, C.-M., & Rittberger, M. (2019). Understanding the Importance of Interoperability Standards in the Classroom of the Future. IECON Proceedings (Industrial Electronics Conference), 2019-October, 6801–6806. https://doi.org/10.1109/IECON.2019.8927631.

Dombrowski, M., Smith, P., & Buyssens, R. (2017). Designing alternative interactive techniques to aid in prosthetic rehabilitation for children. Advances in Intelligent Systems and Computing (Vol. 483). https://doi.org/10.1007/978-3-319-41661-8_63.

Ford, S., & Minshall, T. (2019). Invited review article: Where and how 3D printing is used in teaching and education. Additive Manufacturing, 25, 131–150. https://doi.org/10.1016/j.addma.2018.10.028.

Hasani, H., Mardi, S., Shakerian, S., Taherzadeh-Ghahfarokhi, N., & Mardi, P. (2020). The Novel Coronavirus Disease (COVID-19): A PRISMA Systematic Review and Meta-Analysis of Clinical and Paraclinical Characteristics. BioMed Research International (Vol. 2020). Hindawi Limited. https://doi.org/10.1155/2020/3149020.

Hassan, H., Rahmatullah, B., & Mohamad Nordin, N. (2014). Towards School Management System (SMS) success in teacher’s perception. MOJET-Malaysian Online Journal of Educational Technology, 2(4), 50-60.

Imeri, A., Russell, N., Rust, J. R., Sahin, S., Fidan, I., & Jack, H. (2017). 3D pen utilization in 3D printing practices. ASEE Annual Conference and Exposition, Conference Proceedings, 2017-June.

Liberati, A., Altman, D. G., Tetzlaff, J., Mulrow, C., Gøtzsche, P. C., Ioannidis, J. P. A., Clarke, M., Devereaux, P. J., Kleijnen, J., & Moher, D. (2009). The PRISMA statement for reporting systematic reviews and meta-analyses of studies that evaluate health care interventions: Explanation and elaboration. PLoS Medicine (Vol. 6, Issue 7). https://doi.org/10.1371/journal.pmed.1000100.

Lu, Y. (2021). Scratch Teaching Mode of a Course for College Students. International Journal of Emerging Technologies in Learning, 16(5), 186–200. https://doi.org/10.3991/ijet.v16i05.21269.

Maloney, P. A., Li, B., Zhang, M., & Cong, W. (2018). Creating and assessing an upper division additive manufacturing course and laboratory to enhance undergraduate research and innovation. ASEE Annual Conference and Exposition, Conference Proceedings, 2018-June.

Megri, A. C., & Hamoush, S. (2020). Teaching high-school students innovative topics related to advanced manufacturing and 3D printing. ASEE Annual Conference and Exposition, Conference Proceedings, 2020-June.

Megri, A. C., & Hamoush, S. (2020). Managing an outreach consortium for developing a pipeline of a skilled workforce through advanced manufacturing. ASEE Annual Conference and Exposition, Conference Proceedings, 2020-June.

Mylon, P. T. (2017). Teaching the art of communication through drawing. Proceedings of the 45th SEFI Annual Conference 2017 - Education Excellence for Sustainability, SEFI 2017, 364–371.

Pandian, S. R. (2019). Playful STEAM Learning Using Robots. Proceedings of 2018 IEEE International Conference on Teaching, Assessment, and Learning for Engineering, TALE 2018, 279–285. https://doi.org/10.1109/TALE.2018.8615299.

Pitcher, M. T., Espinoza, P. A., Nevarez, H. E. L., Gomez, H., Anaya, R. H., Hemmitt, H., Perez, O. A., Golding, P., Pruneda, A., Soto, S., Lopez, E., & Paquian, G. (2016). MAKER: Come to the dark side - We have cookies: Creating an interactive display to engage everyone in STEAM. ASEE Annual Conference and Exposition, Conference Proceedings, 2016-June.

Porter, L. A. (2016). Active Learning and Student Engagement via 3D Printing and Design: Integrating Undergraduate Research, Service Learning, and Cross-Disciplinary Collaborations. MRS Advances, 1(56), 3703–3708. https://doi.org/10.1557/adv.2016.82

Sidek, S. F., Soh Said, C., Hayati, M., & Yatim, M. (n.d.). Characterizing Computational Thinking for the Learning of Tertiary Educational Programs. Journal of ICT in Education (Vol. 7).

Sinha, S., Rieger, K., Knochel, A. D., & Meisel, N. A. (2020). The Impact of a Mobile 3D Printing and Making Platform on Student Awareness and Engagement. International Journal of Engineering Education, 36(4), 1411–1427.

Stover, M., Jefferson, C., & Santos, I. (2019). Innovation and creativity: A new facet of the traditional mission for university libraries. Advances in Library Administration and Organization (Vol. 40). https://doi.org/10.1108/S0732-067120190000040006.

Torres, K., Staśkiewicz, G., Śniezyński, M., Drop, A., Maciejewski, R. (2011). Application of rapid prototyping techniques for modeling of anatomical structures in medical training and education. Folia Morphologica, 70(1), 1-4.

Vora, H. D., Alexander, A., Park, I., Yang, C., Sahoo, A., & Chang, Y. B. (2020). Roll-the-roller 3d printing design contest: The experience-based summer bridge program to improve the success of incoming engineering freshmen students. ASEE Annual Conference and Exposition, Conference Proceedings, 2020-June.

Vora, H. D., Rowland, B., Conner, J., Norton, B. K., Hu, Q., & Ivey, T. (2020). Oklahoma state university’s endeavor: Transformation of undergraduate engineering education through the experience-based learning. ASEE Annual Conference and Exposition, Conference Proceedings, 2020-June.

Wang, J., Golly, N. C., Herren, B., Macdonald, J. I., Siddique, Z., & Liu, Y. (2019). Enhancing mechanical engineering education with an integrated 3-D printing approach. ASEE Annual Conference and Exposition, Conference Proceedings.

Wilk, R., Likus, W., Hudecki, A., Syguła, M., Różycka-Nechoritis, A., & Nechoritis, K. (2020). What would you like to print? Students’ opinions on the use of 3D printing technology in medicine. PLoS ONE, 15(4). https://doi.org/10.1371/journal.pone.0230851.

Wu, Y.-C., & Liao, W.-H. (2020). Analysis of learning patterns and performance-a case study of 3-D modeling lessons in the K-12 classrooms. IEEE Access, 8, 186976–186992. https://doi.org/10.1109/ACCESS.2020.3029947.

Published
2022-02-17
How to Cite
Sudin, I. A. A., Rahmatullah, B., Abdullah, M. F. W., Tamrin, K. F., Khairudin, M., & Yahya, S. R. (2022). Kajian tinjauan literatur sistematik terhadap pendedahan pelajar universiti kepada percetakan 3D sebagai persediaan ke industri. Journal of ICT in Education, 9(1), 48-60. https://doi.org/10.37134/jictie.vol9.1.5.2022